The BMPro BatteryPlus35-II-HA High Amp Power Management System from Nomadic Supply Company® is a complete high amp Power Management System designed to support the transition of caravans to lithium batteries. This all-in-one power solution combines a 35A power supply for 12V loads, 30A multi-stage AC charging, and 30A Solar MPPT regulation, as well as a host of battery protection features.
Connect the BMPro BatteryPlus35-II-HA High Amp Power Management System via CAN bus to the BMPro Trek3 RV Battery Monitor for BatteryPlus35-II-HA or to the BMPro Odyssey RV Touch Screen Display w/ OdysseyLink via the OdysseyLink to monitor the status of your battery and to control your caravan features and functions, or use it to connect to the BC300 to monitor high currents via CommLink.
BMPro BatteryPlus35-II-HA High Amp Power Management System is pre-cabled with a permanent mains power supply cord for use with 240V or 110V input power – great for powered sites.
The BMPro BatteryPlus35-II-HA High Amp Power Management System also features a 40A-rated uncontrolled +BRK battery output. This output is specifically designed for loads that do not need to be isolated or have a current rating of higher than the built-in circuit protection of the individual outputs, and have a current rating of less than 40 A.
Designed and manufactured in Australia, the slim and sturdy BMPro BatteryPlus35-II-HA High Amp Power Management System is fully equipped to charge the current generation of deep-cycle batteries. Connect solar panels to the Power Management System and power your adventures with renewable energy. Swap your caravan battery for a LiFePO4 deep cycle and harness the benefits of lithium. This high-amp Power Management System is specially designed to ensure the best performance and longevity of lithium batteries.
Use BMPro BatteryPlus35-II-HA High Amp Power Management System to connect, for example:
• Proactive Electronic Stability Control SwayControl
• Emergency Trailer Break-Away Safety System TrailSafe
• Heaters
• Stereo memory
BMPro BatteryPlus35-II-HA High Amp Power Management System Specifications:
|
Input Voltage Range |
110-240V AC ± 10%, 50-60Hz |
|
Input Surge |
<40A (cold start) |
|
Output Current |
35A (Load + Battery Current) |
|
Factory Set Voltage |
13.65V (Float Voltage) |
|
Output Ripple Voltage |
<150mV |
|
Battery Current Limit |
Maximum 30A |
|
Low Voltage Disconnect |
Lead-acid: 10.8V ± 0.2V LiFePO4: 12.8V ± 0.2V |
|
Battery Connect after LVD |
Lead-acid: 12.8V ± 0.2V LiFePO4: 13.8V ± 0.2V |
|
Battery Drain (when in Storage Mode) |
<15mA |
|
AC/DC Efficiency |
>83% |
|
Cooling Fan |
Digitally controlled |
|
Maximum Solar Input |
800W |
|
Solar Output Current |
30A (nominal) |
|
Solar Start Voltage |
17.5V |
|
Solar Input Voltage (After Start-up) |
15V – 25V |
|
Ambient Temperature |
0°C to 50°C |
|
Communication |
CAN Bus |
|
Dimensions |
327mm x 207mm x 82mm |
|
Weight |
2kg |
|
Standards |
Safety: AS/NZS 60335.2.29, UL 458, UL 1741 EMC: AS/NZS CISPR 32, FCC Part 15 Approvals: RCM, UL, FCC |
BMPro BatteryPlus35-II-HA High Amp Power Management System Documents:
BMPro BatteryPlus35-II-HA High Amp Power Management System Owner’s Manual
