The Mid City Crosswind Assist Delete Programmer for 2019-2024 Mercedes Sprinter Vans (907OBDCWD) from Nomadic Supply Company® eliminates unwanted crosswind assist interventions that can interfere with your driving experience. This professional programming tool allows Sprinter owners to disable the crosswind assist system through a simple plug-and-play procedure using the vehicle’s OBD port.
The Mid City Crosswind Assist Delete Programmer for 2019-2024 Mercedes Sprinter Vans (907OBDCWD) provides a straightforward solution for drivers who prefer full control over their vehicle without electronic assistance systems intervening. This programmer works exclusively with 2019-2024 Mercedes-Benz Sprinter models and offers a permanent modification that can enhance your driving confidence on the road.
Whether you’re operating a commercial Sprinter or using your vehicle for recreational purposes, the Mid City Crosswind Assist Delete Programmer for 2019-2024 Mercedes Sprinter Vans (907OBDCWD) from Nomadic Supply Company delivers reliable performance. The programming process takes just minutes to complete and provides lasting results that improve your overall driving experience by removing unwanted system interventions.
Mid City Crosswind Assist Delete Programmer for 2019-2024 Mercedes Sprinter Vans (907OBDCWD) Features:
- Unwanted Intervention Removal: Eliminates sudden electronic braking or steering corrections caused by the factory crosswind assist system, providing a more consistent driving feel.
- Full Driver Control: Designed for operators who want to maintain complete authority over vehicle dynamics without automated electronic assistance.
- Rapid Installation: Features a streamlined programming process that takes only minutes to complete via the vehicle’s diagnostic port.
- Completely Reversible: The programmer can be used to re-enable the factory crosswind assist feature at any time, returning the vehicle to its original OEM configuration.
- Non-Invasive Solution: Modifies system parameters through the OBD port, requiring no physical part removal or permanent wiring changes.
Mid City Crosswind Assist Delete Programmer for 2019-2024 Mercedes Sprinter Vans (907OBDCWD) Specifications:
- Vehicle Compatibility:
- 2019–2024 Mercedes-Benz Sprinter W907 / VS30
- 2019–2024 Freightliner Sprinter W907
- Interface Port: Standard OBD-II (On-Board Diagnostics).
- Programming Type: Software-based ECU parameter modification.
- Installation Method: 100% Plug & Play; stand-alone unit that does not need to remain plugged in after the process is finished.
- Application: Suitable for both commercial fleet vehicles and recreational van conversions seeking enhanced driving confidence.
Mid City Crosswind Assist Delete Programmer for 2019-2024 Mercedes Sprinter Vans (907OBDCWD) Installation Guide:
Here are the easy-to-follow instructions for the Mid City Engineering 907OBDCWD programmer. This tool is used to disable the factory Crosswind Assist feature, which can sometimes cause intrusive braking interventions on built-out camper vans or vehicles with high centers of gravity and suspension modifications.
Phase 1: Vehicle Preparation
- System Check: Ensure the vehicle is parked on a level surface. Close all doors and ensure all lights and accessories are turned OFF.
- Wake the CAN Network:
- Without pressing the brake pedal, press the Push to Start button twice (Ignition On, Engine Off).
- Verify that the instrument cluster warning lights are illuminated.
- Press the Push to Start button once to turn the ignition back OFF.
Phase 2: Programming Sequence
- Insert Programmer: Within 5 seconds of turning the ignition off, plug the 907OBDCWD module into the OBDII port located under the driver-side dashboard.
- Initialize the Flash:
- Immediately press the Push to Start button twice to turn the ignition back ON.
- Observe the LED indicator inside the programmer case.
- When the LED turns OFF, the programming is complete. This process typically takes between 15 and 60 seconds.
Phase 3: Finalizing the Process
- Remove Module: Once the LED has turned off, turn the ignition OFF and unplug the programmer from the OBDII port.
- Cycle the System:
- Open and close the driver’s door to “reset” the interior CAN bus.
- Wait at least 30 seconds before starting the engine.
Phase 4: Testing & Verification
- Check Dashboard: Start the vehicle and verify that there are no unexpected ESP or ABS warning lights. (Note: The Crosswind Assist is now disabled in the background software).
- Road Test: Drive the vehicle at highway speeds. You should no longer experience the sudden “pulsing” brake interventions previously caused by the Crosswind Assist system during gusty conditions.
- Storage: Keep the programmer in a safe place. It is VIN-locked to your vehicle. If a dealership performing a software update reenables the feature, you can use this module to disable it again.
Important Safety Warnings
- Do Not Drive: NEVER start the engine or drive the vehicle while the OBD programmer is plugged into the port.
- Timing is Critical: If the LED does not turn off or programming fails, restart the process and ensure the 5-second window between “Ignition Off” and “Plug In” is strictly followed.
