Bigger Tires and Better Rear Handling for Your Tacoma
The Skyjacker TCR620 is a pair of 2 inch rear leaf springs built for 2016-2022 Toyota Tacoma trucks. Using Softride technology, the TCR620 leaf springs are shot peened for increased tensile strength and tapered along their length to create more flex at the leaf ends. Teflon wear pads between leafs reduce friction, giving the TCR620 a smooth ride while accommodating larger tires and improved ground clearance.
Key Features
- 2 inch rear lift height with the TCR620 leaf spring pair
- Softride leaf springs shot peened for increased strength
- Tapered leaf design distributes load evenly for smoother ride
- Teflon wear pads between leafs eliminate friction
- Carrying capacity equal to or greater than factory springs
Fitment Table
| Year Range | Make | Model |
|---|---|---|
| 2016-2022 | Toyota | Tacoma |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | TCR620 |
| Lift Height | 2 inch rear |
| Quantity | Pair |
| UPC | Not Published |
What’s Included
- Two rear leaf springs
About Skyjacker
Skyjacker Suspensions has manufactured Softride leaf springs in West Monroe, Louisiana since 1978. The TCR620 continues that tradition, bringing proven spring engineering to modern Tacoma applications.
FAQ
What is the TCR620?
The TCR620 is a pair of Skyjacker 2 inch rear leaf springs for 2016-2022 Toyota Tacoma trucks.
Does the TCR620 fit TRD Pro models?
No, the TCR620 is not designed for Tacoma TRD Pro trims.
Does the TCR620 include shocks?
No, the TCR620 is a leaf spring only kit and does not include shocks.
How much lift does the TCR620 provide?
The TCR620 provides 2 inches of rear lift height.
Does the TCR620 affect towing capacity?
The TCR620 carrying capacity is equal to or greater than the factory Tacoma leaf springs.
Does the TCR620 require welding?
No, the TCR620 is a bolt on leaf spring replacement that does not require welding.
What warranty covers the TCR620?
Skyjacker backs the TCR620 with a one year warranty against manufacturing defects.
Can the TCR620 be installed at home?
Yes, with a floor jack and standard hand tools the TCR620 can be installed in about two hours.
Install Instructions
- Park the Tacoma on level ground and block the front tires before installing the TCR620.
- Raise the rear of the truck and support the frame with jack stands.
- Support the rear axle with a jack and remove the rear wheels.
- Disconnect the brake line bracket and remove the factory U bolts.
- Lower the axle slightly and remove the factory leaf springs.
- Install the TCR620 leaf springs in place of the factory springs.
- Raise the axle back into position and install new U bolts, tightening in a crisscross pattern.
- Reconnect the brake line bracket, install the wheels, and lower the vehicle.
Prop 65 Warning
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
